Mon, May 25
Sergio tested the new Firmware 2.0 with this file
base = 0x10
and reports the HDMI works OK!
Sun, May 24
Wed, May 20
many thanks @alex !
Thu, May 14
Apr 1 2020
please elaborate on the "colored" monochrome output mode, not clear for me yet.
Mar 30 2020
Mar 25 2020
Mar 22 2020
new firmware has been built, testing if the fix is working there as well is still to be done.
pip install --force "pypng==0.0.18"
Mar 16 2020
Mar 12 2020
Ohh sorry my bad, Didn't considered 2nd condition.
Thank you for the explanation.
What output do you get?
I am not getting desired output by running 2nd command. Is there some typo ?
Because on switching the last two images in the sequence. i.e -swap 1,2 gives correct output.
Mar 11 2020
Perfect, tested and verified! Thanks!
Will update wiki now.
This should avoid the sample point setting:
Works, many thanks!
Thanks Bertl for the direction.
Mar 9 2020
It seems that the sample point was moved in recent versions so now the samples average the four channels into one gray value.
Mar 5 2020
Plenty of still images can be found here: http://files.apertus.org/AXIOM-Beta/snapshots/
Will try the command itself soon but from just looking at your post: the output file is monochrome but should be color...
Mar 4 2020
I have used the latest stable release of imageMagick (which is ImageMagick 7.0.9-27) to run
cat index.raw12 | convert \( -size 4096x3072 -depth 12 gray:- \) \( -clone 0 -crop -1-1 \) \( -clone 0 -crop -1+0 \) \( -clone 0 -crop +0-1 \) -sample 2048x1536 \( -clone 2,3 -average \) -delete 2,3 -swap 0,1 +swap -combine test_color.png
and according to me it gave the desired output.