New design for the MicroZed Heatsink with 40x40x10 fan.

How to cerakote: https://youtu.be/kZaVne4_d04?t=810

A common origin could be a good idea in some cases but in Austria we say: "Du kommst in Teufels Küche" ("you get into devils kitchen.." :-)) if you change any part like the hight of a connector or a socket. You have to change this distance in every part in the whole chain. This is not a way to go. There have to be some defined interconnection points on every part but no dependency to any common origin!

their webpages do not look very representative at the moment:
http://www.ceracoating.at
http://www.kfz-holub.at

The fan is rotating with 2000 rpm! I don't want this blade close to my head while filming!
And sadly the design is not open source, they sell licenses....

I also don't like the connection to guns but the coating seems to be very sturdy and resistant and they offer a lot of colors too.
There are two cerakote partners in Vienna (and one is related to cars and not guns :-) ) maybe we can take a look....

If we call the baby with the full name "Apertus Axiom Beta" the version name should be as short as possible. Shortest would be one character and we can build 26 versions. Subversions could be A1, A2....
And we still can give them alphabetical nicknames.
The name on the identification label (with serial number) should be short and straight...

What do you think about naming it like JJMM e.g. 1505
An we could add names like Ubuntu too: 1505 AngryAbigail, 1507 BeautyBelinda
In my opinion numbers are easier to associate with versions then names. ( I just remember JJMM of Ubuntu and not the names...)

We are designing a variant with E-mount. So we could save weight on the camera side, shorten the distance for the center of gravity and choose from good lightweight (and copter proven) lenses. Storing the data as a different thing....

There are aluminium cooling profiles out there. We should find a fitting profile to reduce production costs. Let's search...

Hello Francois,
all files of the pcb-stack are on GitHub: https://github.com/apertus-open-source-cinema/beta-hardware
Feel free to design a camera body for your purpose show us your design and share it!

My laptop came from service packed like this:

pactec has nice things! So what we should find out or decide is what we should use.
Cheap and single use or a more expensive case.

my ideas:

• PU foam in plastic bag formed in wooden model
• vacuum forming with (biocompatible) foil. Video

Comment from Marcus Meissner (mastermind of gphoto) on gphoto-devel group:

Welcome Laszlo, we are glad to get your support!

There has to be a protocol for setting camera parameters from outside the camera (dictator, mobile phone...).
Is there already a protocol implemented? ptp / gphoto could be an option for this...
Every (supported) parameter of a digital camera can be read/set with this protocol.
The picture transfer itself is the not so important part.

from gphoto.org / en.wikipedia.org/wiki/GPhoto

It is planned to make the filter easy to add or to remove from the front of the camera. (-> T96)

All i found for type D is the male version. Still searching...