An alternative may include to implement and use a dedicated phy to stream the output in RTP https://tools.ietf.org/html/rfc4175

In T37#4698, @Bertl wrote:

QSPI works with the correct devicetree entry.

Just send you an email on the sources topic.

If we remove the ethaddr option, will it be recovered by Linux when the PHY is setup?

Update to boot.bin to kernel 3.14. XADC has been added. QSPI still not detected.

New boot.bin for testing.

Yes. Expect an update of the image and uboot this evening.

Status: the current only problem with the current compilation of u-boot seems to be that the uenv.txt is not loaded by default. It did require a minor change to the uenv.txt.

So first of all, the uenv.txt issue will be solved by the description Sven gave. Needs a recompiled u-boot, we can handle that.

What would be the best way to 'clear' my configuration so I can observe the behavior you are having? You did select the dipswitch of booting from SD?

But what I was more interested about: does the image "autoboot"?

So what has changed between the last and this revision? Mainly the automatic starting of the ethernet interface and run DHCP.

Is this on the 7020?

It would be greatly appreciated if someone could take a peak if the following image will work on a vanilla MicroZed.

I have asked Sven if we could directly migrate to the Elphel bootloader code, he was investigating it. But I haven't heard from him, so I contacted him on Sunday about it. Obviously I can upgrade the existing image to something like a 2GB partition and go with that, but I was hoping for "more".

Ok, enough information. I'll make an all in one image.

My suggestion was to take the ArchLinux ZedBoard image, and add our bootpart for the 7010 board. I guess given I see a kernel booting. We don't have any problems with the 7020 :-)

fatload mmc 0 0x3000000 uImage
fatload mmc 0 0x2A00000 devicetree.dtb
setenv bootargs console=ttyPS0,115200n8 root=/dev/mmcblk0p2 rw rootdelay=2 init=/usr/lib/systemd/systemd
bootm 0x3000000 - 0x2A00000

@Bertl Do you have a 7020?

I would like to make a strict distinction between the developer image and the creative image.