Tested the latest build (job id: #40789032) on the real Beta.
devmem works now!
devmem2 as well
there is still a problem with access but thats another problem I assume:
```
devmem 0xF8006210
Error at line 79, file devmem2.c (13) [Permission denied]
```
The cmv tools do not resolve yet.
When typing axiom- and pressing TAB this is the list I get:
```
$ axiom-
axiom-cmv_init.sh axiom-pong.sh
axiom-cmv_reg.sh axiom-power_init.sh
axiom-cmv_reg_read_all.sh axiom-power_off.sh
axiom-cooked.sh axiom-power_on.sh
axiom-data_init.sh axiom-power_vio.sh
axiom-disp_init.sh axiom-prep2.sh
axiom-dump_pll.sh axiom-prep_spkfan.sh
axiom-fclk_init.sh axiom-raw.sh
axiom-gamma_conf.sh axiom-rcn.py
axiom-gen1280_init.sh axiom-rcn_clear.py
axiom-gen1920_init.sh axiom-rcn_darkframe.py
axiom-gen_init.sh axiom-rcn_validation.sh
axiom-getzi.sh axiom-rcsnap.sh
axiom-gpio.py axiom-rectest.sh
axiom-halt.sh axiom-rectest2.sh
axiom-halt_manual.sh axiom-remap_conf.sh
axiom-hdmi_rectest.sh axiom-rest_pll.sh
axiom-if_load.sh axiom-rf_sel.py
axiom-ingmar.sh axiom-rgbhsv.py
axiom-kick.sh axiom-rmem_conf.sh
axiom-kick_hdmi.sh axiom-set_gain.sh
axiom-kick_hdmi_slow.sh axiom-set_wb.py
axiom-kick_manual.sh axiom-set_white.sh
axiom-led_mmc0.sh axiom-setup.sh
axiom-linear_conf.sh axiom-setup_hdmi.sh
axiom-mat4_conf.py axiom-spkfan_init.sh
axiom-mat4_conf.sh axiom-update
axiom-mclr_h.sh axiom-whitebalance.py
axiom-mclr_l.sh axiom-wmem_conf.sh
axiom-pac1720_info.sh axiom-zynq_info.sh
axiom-picture_snap.sh
```
running ls -all in /usr/local/bin shows:
lrwxrwxrwx 1 root root 55 Nov 17 2017 axiom-cmv_reg_read_all.sh -> /opt/beta-software/software/scripts/cmv_reg_read_all.sh
lrwxrwxrwx 1 root root 10 Nov 17 2017 axiom-cmv_snap3 -> /cmv_snap3
lrwxrwxrwx 1 root root 11 Nov 17 2017 axiom-cmv_train3 -> /cmv_train3
To initiate the image sensor communication I would run /usr/local/bin/axiom-kick_manual.sh
which contains the line to load the FPGA bitstream:
cat cmv_hdmi3.bit >/dev/xdevcfg
but the firmware currently contains no *.bit file